Total Pageviews

How Do I bypass my DVD player or Navigation ?

Tuesday, February 8, 2011

Metra/Scosche wire colors For Chrysler Harness


This Factory / Oem Harness Factory / OEM Style radio harness is comparable to:

SCOSCHE INDUSTRIES CR02R or CR02RB
METRA ELECTRONICS 71-6502
AMERICAN INTERNATIONAL CWH-637
BEST KITS & HARNESSES BHO1818

and is the opposite (REVERSE) of:
SCOSCHE INDUSTRIES CR02 or CR02B
METRA ELECTRONICS 70-6502
AMERICAN INTERNATIONAL CWH-638
BEST KITS & HARNESSES BHA1818

The color codes used on this car stereo connector conforms to the standards set by the E.I.A. (Electronics Industry Association). The colors used will not match the vehicles original colors.

These colors should only be used as a guide, because vehicles are made in multiple assembly plants the wire colors used can sometimes differ. You will need to match the colors on this harness with the colors listed in our wire color charts. If your vehicle isn't listed in our chart and even if it is you should ALWAYS test the wire you are making a connection to prior to making any connections. We're not responsible for the installer not verifying the accuracy of the color information prior to connection.
Below is a list of E.I.A. standards for reference purposes. If a wire is unavailable or unused simply tape it off.
Connector Wire Color
 
Function / Connection
Yellow
=
12 Volt Battery / Constant (12V+)
Red
=
12 Volt Ignition / Switched (12V+)
Blue
=
Power Antenna
Blue/White
=
Remote Turn on (12V+)
Orange
=
Illumination / Dimmer
Black
=
Chassis Ground (12V-)
White
=
Left Front Positive (LF+)
White/Black
=
Left Front Negative (LF-)
Gray
=
Right Front Positive (RF+)
Gray/Black
=
Right Front Negative (RF-)
Green
=
Left Rear Positive (LR+)
Green/Black
=
Left Rear Negative (LR-)
Violet
=
Right Rear Positive (RR+)
Violet/Black
=
Right Rear Negative (RR-)
And now since you have the original factory plug back in your vehicle, you have the option of installing a plug and play aftermarket radio using an aftermarket harness or purchasing a factory replacement radio and then its just a matter of plug and play. This is key in replacing the damage that some hack job installer or the if did by cutting off the factory harness.

Please note these harnesses are designed to be a replacement for the original factory harness. And they are only designed to work on Factory radios which are NOT 'factory amplified' or 'premium sound' models. Although they may still fit these radios, we're unable to offer any form of assistance or support when purchasing this for 'premium sound radios' and often times they won't even connect to premium sound radios/systems without additional parts or OEM sound Amplifiers.
 Vehicle Applications                                        Part Integration
CHRYSLER PACIFICA 2003 - 2008
CHRYSLER PT CRUISER 2002 - 2005
CHRYSLER SEBRING 2002 - 2006
CHRYSLER TOWN & COUNTRY 2002 - 2007
DODGE CARAVAN 2002 - 2007
DODGE DAKOTA 2002 - 2004
DODGE DURANGO 2002 - 2003
DODGE INTREPID 2002 - 2004
DODGE NEON 2002 - 2005
DODGE RAM PICKUP 2002 - 2005
DODGE RAM VAN 2002 - 2002
DODGE STRATUS 2002 - 2006
DODGE VIPER 2003 - 2005
JEEP GRAND CHEROKEE 2002 - 2004
JEEP LIBERTY 2002 - 2007
JEEP WRANGLER 2004 - 2006

This harness WILL NOT WORK if you have a vehicle with a premium sound system. A.K.A. "BOSE", "JBL", "MACH", "ROCKFORD", "HARMON KARDON" or any other factory amplified system. This harness may plug into those vehicle(s) oem radios but we make no guarantee or commitment on its functionality and cannot support them. Other vehicles may be applicable that are not listed. We do our best to provide the most accurate information possible, however this information is supplied by the part manufacturer and/or vehicle manufacturers and passed along to our customers. As always please verify that this is the correct part via picture and/or other reference data as we are not responsible for in-accurate data.